We would like to share our more than 15 years of experience in development, production and application of HPC (High Performance Concrete) and UHPC (Ultra high Performance Concrete) in industries worldwide
We manufacture UHPC mortar, UHPC grouting, UHPC shotcrete and UHPC casting material grades. Our UHPC products are used as construction material, wear protection material, anti-corrosion material, safety material, road surface, industrial floor system, fire and temperature protection material, design material, floating constructions, etc.
Here is a selection of industrial sectors that have been using UHPC materials for more than 15
years:
Steel industry, cement industry, power plant industry, road construction, façade construction, wind
power plants, bridge construction, offshore industry, port architecture, airports, building
structures, seismic fuses, security industry, military, coastal protection, sewers, chemical
industry, petroleum refining, design, waste treatment industry, food industry, etc.
That's why we've developed this customer service organization with our most experienced staff and international partners
The future of the facade and balcony architecture is designed with HPC (High Performance concrete) and UHPC (Ultra High Performance Concrete) fibre reinforced concrete. HPC and UHPC are concrete materials with outstanding properties compared to today's standard concrete. HPC and UHPC are perfect material for existing building construction, new building construction and rehabilitation / conservation of historic facade and balcony construction
Due to the significantly higher compressive strength (105 - 140 MPa / 14500 - 23000 psi), much thinner (15 mm / 0,6 inch) and more elegant load-bearing structures are possible. Likewise, considerably higher spans of prefabricated parts are possible. HPC and UHPC has no pore, so corrosion is not a problem. Due to the extremely high strength values, balcony systems with elegant design, thin board thickness and high load capacity can be constructed. This can be of great advantage, especially in the design of green facades and balconies of high-rise buildings. It gives the architect much greater scope for design
Facade construction can be produced in a fineness which until now was not possible with standard
concrete.
The finished elements produced with HPC and UHPC casting compound do not require any or very little
surface finishing. The dimensional accuracy is so exact after hardening that it is only necessary in
extreme cases of extremely high production accuracies in the hundredth of a millimeter range
Facade construction can be produced in a fineness which until now was not possible with standard
concrete.
The finished elements produced with HPC and UHPC casting compound do not require any or very little
surface finishing. The dimensional accuracy is so exact after hardening that it is only necessary in
extreme cases of extremely high production accuracies in the hundredth of a millimeter range.
As base material for HPC and UHPC facade and balcony materials we use a very high quality of white cement. At the special request of customers, we use the best white cement Portland and in addition, all the other raw materials for our HPC and UHPC are also of extreme whiteness. This allows us to highlight the luminosity of color pigments or give HPC and UHPC natural stone replicas a luminosity close to the original.
Color pigments additive are added during the mixing of the HPC or UHPC material or during production of
HPC and UHPC material. Minimal color variation, as you can find in natural stones , are possible. Darker
colors tend to have larger color variations.
We can produce HPC and UHPC binder systems in such a way, that machining with a waterjet cutting system
is possible. With such a cutting system fast cuts and extremely thin cuts are possible.
Due to the nanoparticle technology of HPC and UHPC, extremely fine or smooth surface structures can be produced. Almost all natural stone surfaces can be reproduced. Only the quality of the mold limits fineness or smoothness.
HPC and UHPC can be casted almost poreless and capillary-free. Therefore all products made from HPC and
UHPC are extremely resistant to any environmental influences. Based on this HPC and UHPC are 100%
seawater resistant.
All standard HPC and UHPC binder systems are up to 450°C / 842°F temperature resistant. We also produce
high temperature resistant UHPC binder systems which are temperature stable up to 1200°C / 2190°F . All
our HPC and UHPC binder systems are extremely shock temperature resitant.
HPC and UHPC materials reach more than 70% of their nominal strength after 24 hours. This means that a strength is reached which will reach the standard concretes only after 28 days.
Due to the very high resistance of HPC and UHPC façade and balcony materials to environmental influences of all kinds, the expected service life is several times higher than with any other façade material. Moreover, the inspection effort is extremely low. The durability of HPC and UHPC facade and balcony material is 100+ years.
We develop new innovative HPC and UHPC binder systems for a wide range of requirements for our customers. These materials developments incorporate more than fifteen years of worldwide experience in the development, production and application of HPC and UHPC materials.
We have developed, produced and applied HPC and UHPC products for architecture, design, facades, offshore, anti-corrosion, wear protection, flooring, power plants, steel mills, mining, shipping, military, engineering, airports, port facilities, etc.
We produce for you according to your recipe your UHPC quality as ready mix in standard paper bags, plastic containers, Bigbags or silo trucks in any quantity you want.
You have innovative, extraordinary HPC and UHPC material, product or application ideas and are looking for a development partner. Please contact us at any time. With your ideas and our experience, interesting future-oriented products should be created for you.